SolidWorksSolidWorks
Email Password
For Users of SolidWorks, COSMOSWorks, PDMWorks, and affiliated products
 
Advertise here
Reduce your product's eco-footprint
Latest SolidWorks Partners

3DVision Approved by Kentucky Board for Education
Press Release Issued By 3DVision
3DVision Technologies announced their approval by the Kentucky State Board of Proprietary Education for SolidWorks 3D CAD Software Training.
Geometric to Demonstrate CAMWorks 2010 and DFMPro
Press Release Issued by Geometric
Geometric will attend DieMould India 2010 to be held at the Bombay Exhibition Centre, Goregaon in Mumbai, India from March 18-21, 2010.
Pratt & Miller Used ANSYS in Re-design of Race Car Part
Press Release Issued by ANSYS
Pratt & Miller used a combination of software from ANSYS and its partner Safe Technology Limited to redesign a cracked brake pedal face.
Lattice Technology Releases Lattice3D Reporter Ver. 3.1
Press Release Issued by Lattice Technology
The latest version of the Lattice3D Reporter application embeds 3D, BOM and related data in Microsoft Excel spreadsheets.
GT Metal Recoups CADCAM Spend in Just Two Months
Press Release Issued By JETCAM
GT Metal adopts JetCAM.
Ensuite Now Supports 2010 CAD Applications
Press Release Issued by CCE
EnSuite supports the latest versions of Unigraphics NX, Pro/E Wildfire, and SolidWorks CAD formats.
NEi Software Meets Market Demand with NEi Fusion 2.1
Press Release Issued By NEi
NEi Software Nastran FEA software, announced the release of NEi Fusion 2.1,


Release of Adept 8.2 Announced
Press Release Issued by Synergis Software
New version of Adept focused on ease of administration, security, and Windows 7 support.
Symmetry Solutions #1 for SolidWorks Subscription Service
Press Release Issued By Symmetry Solutions Inc.
Symmetry Solutions announced that Dassault Systèmes SolidWorks Corp. has recognized it as the Top VAR in North America for Subscription Service.
International Gathering to Discuss Advances in Simulation
Press Release Issued By SIMULIA
Dassault Systèmes announced that keynote addresses from ExxonMobil Upstream Research Company and Tetra Pak will highlight the SCC.
AMV Steelworks 2010 at SolidWorks World 2010
Press Release Issued By AMV
AMV announced it will demonstrate AMV STEELWORKS 2010 at the SolidWorks World 2010 Conference.
Geometric to Display Automation Intelligence at METAV 2010
Press Release Issued By Geometric Technologies
Geometric Technologies showcases the latest releases of CAMWorks and DFMPro at METAV 2010.
Elecworks' Certification as SolidWorks Gold Product
Press Release Issued by Trace Software International
Trace Software International announced that elecworks has achieved Certified Gold Partner status with DS SolidWorks Corporation.
Lattice Technology Releases Updated Converter Products
Press Release Issued by Lattice Technology
Support for 3D CAD data now includes Autodesk Inventor 2010 and Wildfire 5 64-bit Platforms.
Geometric’s DFMPro Recognized as a Top Innovation
Press Release Issued by Geometric Limited
Innovations is an annual event conducted by the Pune Chapter of IIT Bombay Alumni Association to recognize novel ideas in science and technology.
Delcam Launches Integrated CAM for SolidWorks
Press Release Issued by Delcam
The initial version of Delcam for SolidWorks includes the company’s industry-leading technology for drilling and two- through five-axis milling.
keytech PLM Showcases keytech V12
Press Release Issued by keytech PLM
As a Certified Gold Product, keytech PLM runs inside the SolidWorks window and streamlines the engineers’ access to their most current design data.
Quickparts Celebrates 10 Years
Press Release Issued by Quickparts
Quickparts was the very first company to offer the online instant quoting and procurement of custom manufactured parts.
PhotoView 360 and modo 401 Open New Doors
Press Release Issued by Luxology
Designers are achieving photorealistic imaging with Solidworks 2010, Solidworks PhotoView 360 and Luxology's modo software.
Next Step in 3D Navigation for SolidWorks Users Announced
Press Release Issued by 3Dconnexion
3Dconnexion announced new 3D mouse capabilities for SolidWorks.
Aras is Compatible with Windows 7
Press Release Issued by Aras
Aras Innovator suite is the first enterprise PLM offering that is fully compatible with Microsoft Windows 7.
Geometric Releases Version 2.1 of DFMPro for Pro/E and SW
Press Release Issued by Geometric Technologies
DFMPro is an automated DFM review tool facilitating upstream manufacturability validation and identification of areas in design.
NEi Works 2.1 at Unveiled SolidWorks at World 2010
Press Release Issued by NEi
NEi Softwarewill unveil the next generation of NEi Works at SolidWorks World 2010 in Anaheim, CA.
TraceParts 3D Catalogs to be Presented at SolidWorks World
Press Release Issued by TraceParts
The first 3DContentCentral® content partner demonstrates its 10-year commitment to the SolidWorks community.
New: Fireproof, Waterproof Hard Drives
ioSafe uses SolidWorks CAD software to design …

Spanish Engineering Students Get SolidWorks
Escola Universitària Salesiana de Sarrià of Barcelona …

New Hydrokinetic Alternative Energy Programs
Sigma Design announced engineering consultation services that …

PDM Migration Expert Series Free Webinars
PROSTEP announces a series of free webinars …

ArcherGrey Joins Aras Partner Program
Aras announced that ArcherGrey has joined the …

3DVision Approved by Kentucky Board for Education
3DVision Technologies announced their approval by the …

Agreement Extends Collaboration to Clients
AT&T provides Accenture with platform to allow …

Lattice Technology Releases Lattice3D Reporter Ver. 3.1
The latest version of the Lattice3D Reporter …

Pratt & Miller Used ANSYS in Re-design of Race Car Part
Pratt & Miller used a combination of …

Geometric to Demonstrate CAMWorks 2010 and DFMPro
Geometric will attend DieMould India 2010 to …

Need Help Writing Your Whitepaper?
Structure Info. has made a template for …

Next CIMdata PLM Certificate Program Scheduled in Germany
The CIMdata PLM Certificate Program prepares PLM …

Processia Solutions Joins Aras Partner Program
Processia Solutions provides a full range of …

The Workstation Market Takes Another Step Forward in Q4'09
JPR reports robust results for the workstation …

Cyon Research Opens Spring 2010 Survey for Engineering Firms
Survey focuses on business outlook at firms …

3D Systems Reports Results for Fourth Quarter 2009
3D Systems Corporation announced its operating results …

Carestream Health Selects Aras as Enterprise PLM Backbone
Aras announced that Carestream Health has …

Augmented Reality for All
Seac02 launches “LinceoVR 4 ALL”, the newest …

EOS CEO to Speak at Rapid 2010
Dr. Hans J. Langer, a pioneer of …

Planit Appoints Ambo Technologies as New Radan Reseller
Planit has extended their relationship with Toronto-based …

Release of Adept 8.2 Announced
New version of Adept focused on ease …




NEi Software Meets Market Demand with NEi Fusion 2.1
NEi Software Nastran FEA software, announced …

Ensuite Now Supports 2010 CAD Applications
EnSuite supports the latest versions of Unigraphics …

GT Metal Recoups CADCAM Spend in Just Two Months
GT Metal adopts JetCAM. …